Yadda ake shigar wpc decking

Wpc decking, ko Haɗin kai wpcdecking, shine mai son maye gurbin ainihin itace a cikin ayyukan gine-gine.Farashin WPCba kawai sauƙi don shigarwa ba amma kuma ya fi dacewa da muhalli.Don haka, wannan sakon zai taimaka muku fahimtar ayyukan da dole ne a bi idan kuna son shigar da decking WPC a cikin gidan ku.

Haɗin kaiFarashin WPCJagoran Shigarwa

Kayayyaki & Kayayyakin da ake buƙata:

1.Haɗin Decking Board

2.Haɗin Decking Joists

3.Boyayyen Fasteners:shirye-shiryen bidiyo na farauta masu haɗaka;

4.shirye-shiryen bene masu haɗaka;hadaddiyar giyar sukurori;fadada dunƙule

5.Allolin Gefen:

6.composite decking gefen datsa

7.Guma na roba

8.Drill

Matakan Shigarwa:

Abubuwan WPC masu ɗorewa (kuɗin filastik itace) suna da nau'in itace da taurin filastik.Tare da ingantaccen shigarwa da kulawa, zai iya ɗaukar kimanin shekaru 25-30.A matsayin kwararreWPC decking manufacturer da maroki, Unifloorgwaninta ne a cikin samfuranmu.Farashin WPC jagorar shigarwa yana ba ku takamaiman dalla-dalla dalla-dalla darussan shigarwa don sauƙaƙe shigarwa.

Mataki 1 Gyara Joists

Ƙayyade tazarar da ke tsakanin haɗin gwiwa guda biyu, ana ba da shawarar 30cm don faɗuwar murabba'i mai fa'ida;35cm don zagaye mai zurfi, kuma 40cm don ƙaƙƙarfan bene.Ana iya gajarta tazarar kamar yadda aka nema.Sa'an nan kuma, haƙa maɗaukaki kuma gyara su tare da fadada sukurori.

Mataki 2 Shigar da WPC Decking

1. Lokacin shigar da bangarori na decking composite, ya kamata a kiyaye nisa na 3cm daga ginin.
2. Sanya allon bene na farko don fara shigarwar ku.
3. Haɗa allunan biyu tare da filastik T shirye-shiryen bidiyo & sukurori, diamita na rami ya kamata ya zama ƙasa da 3/4 na diamita na dunƙule don haɓaka rikon dunƙule.Ana amfani da shirye-shiryen T na filastik & sukurori don gyara tazara tsakanin allunan biyu don hana zamewa. (Ku buga allunan a hankali tare da guduma na roba yayin aikin shigarwa don cimma daidaitattun giɓi da kyakkyawar ƙasa.)

1. Maimaita wannan tsari har zuwa allon ƙarshe.Sa'an nan kuma ya zo mataki na ƙarshe, saita allunan gefen a kan decking, kuma gyara su da screws, sa'an nan shigarwa ya cika.

Matakan Shigarwa

Osai ya nuna a lura

1. Shigar da bene tare da kayan tsaro.

2. Ya fi sauƙi don ɗauka tare da gefuna na bene.

3. Tuntuɓi mai kaya don kayan aikin da aka ba da shawarar

4. Kar a zubar da kayan bene lokacin sauke kaya

5. Koma zuwa ƙa'idodin ginin gida kafin shigarwa.

6. Za a iya zubar da tarkace tare da tarkacen gini na al'ada

.